Manfrotto MVH502AH Pro Video Tripod Head with Flat Base, Fluid Pan, Drag System, Built-In Counterbalance and Calumet Quick Release Plate Standard Packaging

Manfrotto NA - All of this provides control and high video camera support, no matter what the situation, the shooting style or the equipment set-up. Counterbalance system on TILT movement. It also has an easy link connector, so you can directly attach an external monitor or other accessory equipment such as lights, external monitor or a microphone.

Easy link for external accessories. Importantly, the head can be combined with all photo tripods, thanks to the 9. 525 mm female thread. It's ideal for camcorder and HDSLR cameras supplied with external accessories 4 kg max capacity. It gives you a wide range of professional features such as high-performance variable fluidity and a counterbalance setting to match the weight of your camera.

Manfrotto MVH502AH Pro Video Tripod Head with Flat Base, Fluid Pan, Drag System, Built-In Counterbalance and Calumet Quick Release Plate Standard Packaging - Movement around the axes is smoothed by ball-bearing units which remove all unwanted vibration. Enabling you to spend more time taking video and less time on assembling you equipment. Flat base for multiple tripod connections. This pro video head comes with a sliding plate for very fast camera connection and system set up.

. The head's fluid drag system is based on variable fluid cartridges on both, TILT and PAN axes. Variable fluid drag System on PAN and TILT movements.

More information about Manfrotto NA

Manfrotto 055 Aluminum 3-Section Tripod with Horizontal Column MT055XPRO3

Manfrotto MT055XPRO3 - Technical specifications: Closed Length 24. 02”; leg angles 25°/46°/66°/88°; 3 leg sections; Legs Tube Diameter 1. 18-1. 02 089”; load capacity 19. 84 lbs; maximum height with Center Column Down 55. 12”; maximum Height 66. 93”; minimum Height 3. 54”; weight 5. 51 lbs. Unprecedented Strength and Rigidity Featuring Quick Power Locks.

Upper disk with rotating Bubble Level to Level on All Planes. The key feature of the mt055xpro3 is its 90° column, which allows the column to be extended vertically or horizontally. Intuitive and ergonomic leg angle selectors allow each leg to be independently and solidly set to any of the preset angles, allowing positioning freedom.

Manfrotto 055 Aluminum 3-Section Tripod with Horizontal Column MT055XPRO3 - Switching between vertical and horizontal column orientation requires no disassembly, and can even be done with a camera attached. The top casting of the 055xpro3 has an easy link connector for supporting photo or video accessories such as an LED light, flash, or reflector on an extending arm or bracket, transforming the tripod into a practical mobile studio.

The professional 3-Section Aluminum Tripod Solution. A bubble level is built in to the top of the center column for precise framing. The legs of the 055xpro3 tripod are also fast to extend and adjust, thanks to the Quick Power Lock QPL levers.

More information about Manfrotto MT055XPRO3


Similar products:


Manfrotto 755XB MDEVE Aluminum Tripod with Built in 50mm Ball Leveler

Manfrotto 755XB - The extremely versatile 755xb mdeVe Aluminum Video Tripod from Manfrotto is ideal for Mini DV camcorders. Upper disk with rotating Bubble Level to Level on All Planes. Manfrotto's q90 center Column Boasts Quick One Finger Operation. Easy link Connection for Adding Accessories. Replaces item # 755b unprecedented Strength and Rigidity Featuring Quick Power Locks.

This allows the camera operator to level the camera and even adjust its height without needing to make micro adjustments to each individual tripod legs. Not only does this allow the camera to be offset from the leg position, it is also the simplest way to shoot a subject from directly overhead. Made entirely of aluminum, the 755xb has a removable center column with a built-in 50mm levelling ball and bubble spirit level that can easily be fitted as a lateral arm.

Manfrotto 755XB MDEVE Aluminum Tripod with Built in 50mm Ball Leveler - Limited 2-Year Warranty. The professional 3-Section Aluminum Tripod Solution. The 755xb's unique center column construction and precision-machined red anodized aluminum allows the leveling ball to be locked by a detachable rotating grip built at the bottom of the center column.

More information about Manfrotto 755XB


Similar products:


Manfrotto 190XPRO Aluminum 4-Section Tripod MT190XPRO4

Manfrotto MT190XPRO4 - It’s the right choice for all those photographers wanting a strong and reliable support even when travelling. It is easy to read, whatever the shape of the head or however the tripod is set up. Manfrotto's q90 center Column Boasts Quick One Finger Operation. The new leg angle selectors are also easy to set up, as they are made following the most innovative ergonomic standards and prevent fingers and nails being trapped in the upper casting.

Built in rotating bubble level. New leg angle selectors. The new patented 90° column is accessible when you need it to be, with a quick ‘one finger’ operation. Thanks to the additional 4 section, legs can be collapsed to a more compact dimension, enhancing transportability. Solid and fast set up with the new Quick Power Lock System.

Manfrotto 190XPRO Aluminum 4-Section Tripod MT190XPRO4 - The new 190 allows you to create a portable photographic studio, thanks to the new "Easy link" plug, which enables instant connection between tripod and accessories, such as LED lights for Macro Photography and VDSLR applications through arms and brackets. Technical specifications:max height with Center Column up: 63 inchesMax Height with Center Column down: 53.

2 inches Lowest Height: 3. 2 inches closed Length: 19.

More information about Manfrotto MT190XPRO4


Similar products:


Sirui P-204SR P Series Monopod

Sirui 78163, EAN:6952060004181 - Wrist Strap. Upper disk with rotating Bubble Level to Level on All Planes. Removable for use as a standard monopod. Patented panning grip smoothly rotates 360°Adjustable friction control on the base ball head lets you adjust tension for different weight equipment and resistance requirements. Patented base locking collar keeps the monopod rigidPatented removable feet can be used as a table top tripodFoam grip for solid hold in wet or cold conditionsMounting plate comes with double headed, Unprecedented Strength and Rigidity Featuring Quick Power Locks.

Limited 2-Year Warranty. And if you need to get your equipment up high or want an unusual perspective, you can, thanks to their rugged construction and lightweight design!! SIRUI P-204S is made of high strength aluminum alloy. Features: three sturdy fold-down support feet that provide additional stability and flexibility.

Sirui P-204SR P Series Monopod - This unique feature lets you easily follow moving subjects, even if your video head or monopod head does not have a panning base! Only the top section of the monopod turns - not the entire shaft. The professional 3-Section Aluminum Tripod Solution. Easy link Connection for Adding Accessories. Sirui has introduced the perfect support system forvideographers on the go! The SIRUI P-S Series Multi-function Photo/Video Monopod.

That means you can hold onto the monopod for added stability and control! No other system has this important capability. It's foam padded for a comfortable feel and secure hold in cold or wet conditions.

More information about Sirui 78163, EAN:6952060004181


Similar products:


SMALLRIG BMPCC 4K Cage for Blackmagic Design Pocket Cinema Camera 4K w/Cold Shoe, NATO Rail – 2203

SMALLRIG 2203A-AU - Mutiple moutings】this cage comes with multiple mounting points, such as 1/4'' & 3/8'' threaded holes, cold shoe and 3/8'' locating holes for ARRI standard, like microphone or SmallRig Articulating Arm - 2070, allow you to attach more accessories, etc. Nato rail】features built-in nato rail that allows you to quickly release accessories with NATO clamp.

Removable Aluminum Spike. Compatible with smallrig mount for samsung t5 ssd 2245, hdmi & ssd cable clamp 2246 and metabones adapter support 2247 compatibility:for blackmagic design pocket cinema Camera 4K Package Includes: 1 x BMPCC 4K Cage 3 x 1/4 Screw 1 x Hex Spanner 1 x Plate with Locating Pins Product Dimensions: 192 x 115 x 75mm Net Weight: 300g Materials: Aluminum Alloy Unprecedented Strength and Rigidity Featuring Quick Power Locks.

SMALLRIG BMPCC 4K Cage for Blackmagic Design Pocket Cinema Camera 4K w/Cold Shoe, NATO Rail – 2203 - New leg angle selectors. High customization】smallrig bmpcc 4k cage is specifically designed for blackmagic Design Pocket Cinema Camera 4K, it would not block any buttons on the camera and you are able to access not only the battery but even the SD card slot. Form-fitting design with unobstructed battery & SD card access 4.

Custom Padded Case. Multiple mounting interfaces nato rails, 1/4''-20 and 3/8''-16 threaded holes, locating holes for ARRI standard and cold shoe for accessories 3. Manfrotto's q90 center Column Boasts Quick One Finger Operation. Featured recommendations】compatible with ronin s and crane 2.

More information about SMALLRIG 2203A-AU


Similar products:


Universal Camera L Bracket Quick Release L Plate 1/4" Screw Arca Swiss Vertical Video Shooting Compatible with Manfrotto Nikon D750 D850 D3400 Canon 80D 5D 7D Sony a7riii a6000 a6500 DSLR Tripod Head

Vikerer 8595764808 - Removable Aluminum Spike. Perfect protection】secure tightly via 2 screws on the top and bottom, 2 detachable small pins are used to prevent your camera from twisting. Built in rotating bubble level. 3. Installation: the l bracket consists of 2 plates, a shorter and a longer the SHORTER PLATE with the STANDARD SLOT of Swiss-Arca 38-39MM and 8pcs 1/4'' screw holes.

Introduction: 1. Universal】shorter: arca-swiss standard screw-knob quick release plate + longer: l-shaped quick release plate compatible with most of dslr cameras with arca-swiss standard, suck like canon eos 80d t6 5d mark ii 6D 60D 7D 70D 77D D800 T6i 1300D Sony a7riii a7rii A7S a6000 a6300 a6500 Nikon D750 D850 D3400 D3300 D5600 D5300 D7200 D7500 Z6 PANASONIC GH5 GH4 GH3 and more DSLR camera of small size.

Standard 1/4-20 and 3/8'' screw, suitable for most tripod, monopod, etc. With 1/4'' and 3/8'' screw, can be both used on video tripod head such as Manfrotto and also gimbal stabilizer like DJI Osmo Ronin Zhiyun Smooth perfect solution for Instagram IGTV vertical video shooting. Lightweight and portable, can be used along with tripod or just hand.

Universal Camera L Bracket Quick Release L Plate 1/4" Screw Arca Swiss Vertical Video Shooting Compatible with Manfrotto Nikon D750 D850 D3400 Canon 80D 5D 7D Sony a7riii a6000 a6500 DSLR Tripod Head - Mutiple moutings】this cage comes with multiple mounting points, allow you to attach more accessories, cold shoe and 3/8'' locating holes for ARRI standard, like microphone or SmallRig Articulating Arm - 2070, such as 1/4'' & 3/8'' threaded holes, etc. Nato rail】features built-in nato rail that allows you to quickly release accessories with NATO clamp.

Unprecedented Strength and Rigidity Featuring Quick Power Locks. And we suggest that you can install the camera above the shorter plate, then the space on the bottom will not affect any passage of cable Product Specification: Material: Aluminum Alloy Color: Black Weight: approx 140g Package includes: 1x 50mm / 1.

More information about Vikerer 8595764808


Similar products:


Manfrotto NEW MT055XPRO3 055 Aluminium 3-Section Tripod with Horizontal Column Black With A Bonus Zaykir Strap

Manfrotto 4332050765 - Because it rotates freely around the centre column, you'll be able to compose your photos and videos so that neither the equipment nor the mountain head obscure your view. Thanks to its versatile 90° centre column mechanism, it can be extended horizontally or vertically in only a few seconds. The horizontal column mechanism is easily extendible, which means you can perform that all-important shoot at the last minute.

Save even more time when you're on a busy schedule. Upper disk with rotating Bubble Level to Level on All Planes. Featured recommendations】compatible with ronin s and crane 2. Custom Padded Case. For better setup, "smallrig lens adatper support for metabones 2247" and "smallRig HDMI cable clamp 2246", please search "SmallRig Mount for Samsung T5 SSD 2245", which are exclusively designed for BMPCC 4K.

Manfrotto NEW MT055XPRO3 055 Aluminium 3-Section Tripod with Horizontal Column Black With A Bonus Zaykir Strap - Lifetime warranty】we assure you the best quality by offering lifetime warranty which make your purchase absolutely risk-free. High customization】smallrig bmpcc 4k cage is specifically designed for blackmagic Design Pocket Cinema Camera 4K, it would not block any buttons on the camera and you are able to access not only the battery but even the SD card slot.

Safety payload Weight: 9 kg. Adjust the tripod legs in virtually no time at all, and with the Quick Power Lock you'll be able to block or unblock each leg section to open them single-handedly in one movement. Mutiple moutings】this cage comes with multiple mounting points, such as 1/4'' & 3/8'' threaded holes, like microphone or SmallRig Articulating Arm - 2070, allow you to attach more accessories, cold shoe and 3/8'' locating holes for ARRI standard, etc.

More information about Manfrotto 4332050765


Similar products:


Manfrotto 577 Rapid Connect Adapter with Sliding Mounting Plate for Bogen/Manfrotto Tripods

Manfrotto 577 - For better setup, please search "smallrig mount for samsung t5 ssd 2245", "smallrig lens adatper support for metabones 2247" and "SmallRig HDMI cable clamp 2246", which are exclusively designed for BMPCC 4K. Lifetime warranty】we assure you the best quality by offering lifetime warranty which make your purchase absolutely risk-free.

Manfrotto 577 Rapid Connect Adapter with Sliding Mounting Plate for Bogen/Manfrotto Tripods - New leg angle selectors. Easy link plug for instant accessory connections. Easy installation】the shorter plate is installed on the bottom and with the standard slot of Swiss-Arca 38-39mm. Removable Rubber Foot. Easy link Connection for Adding Accessories. Plate slides 2 inches. Safety payload Weight: 9 kg. Quick-release adapter for convenient removal of camera.

Custom Padded Case. Redesigned upper disk with rotating bubble level. Q90 column for great positioning possibilities. Wrist Strap. Featured recommendations】compatible with ronin s and crane 2. Shoulder Strap.

More information about Manfrotto 577


Similar products:


SMALLRIG Cool Ballhead Arm Super Clamp Mount Multi-Function Double Ball Adapter with Bottom Clamp for Ronin-M, Ronin MX, Freefly MOVI - 1138

SMALLRIG 1138 - Universal】shorter: arca-swiss standard screw-knob quick release plate + longer: l-shaped quick release plate compatible with most of dslr cameras with arca-swiss standard, suck like canon eos 80d t6 5d mark ii 6D 60D 7D 70D 77D D800 T6i 1300D Sony a7riii a7rii A7S a6000 a6300 a6500 Nikon D750 D850 D3400 D3300 D5600 D5300 D7200 D7500 Z6 PANASONIC GH5 GH4 GH3 and more DSLR camera of small size.

Easy installation】the shorter plate is installed on the bottom and with the standard slot of Swiss-Arca 38-39mm. Rubber pads on the bottom protect your camera body from scratching. 4. If your swiss-arca clamp is the different size, don't worry, you can install the shorter plate on your quick release plate on the Swiss-Arca clamp with 1/4'' screws directly.

High customization】smallrig bmpcc 4k cage is specifically designed for blackmagic Design Pocket Cinema Camera 4K, it would not block any buttons on the camera and you are able to access not only the battery but even the SD card slot. It can lock the rod on the cage via the clamp tightened by the locking knob.

SMALLRIG Cool Ballhead Arm Super Clamp Mount Multi-Function Double Ball Adapter with Bottom Clamp for Ronin-M, Ronin MX, Freefly MOVI - 1138 - For better setup, "smallrig lens adatper support for metabones 2247" and "smallRig HDMI cable clamp 2246", please search "SmallRig Mount for Samsung T5 SSD 2245", which are exclusively designed for BMPCC 4K. Lifetime warranty】we assure you the best quality by offering lifetime warranty which make your purchase absolutely risk-free.

Compatible with most Bogen/Manfrotto tripods. Built in rotating bubble level.

More information about SMALLRIG 1138


Similar products:


NP-F550 RAVPower Battery Charger for Sony NP F970, F750, F770, F960, F550, F530, F330, F570, CCD-SC55, TR516, TR716, TR818, TR910, TR917 and more 2-Pack Replacement Battery Kit, Dual Slot Charger

RAVPower CA-RP-BC006-023 - Redesigned q90 center column with quick one finger operation. Unprecidented Strength. Easy link connection for adding accessories. Removable Aluminum Spike. High customization】smallrig bmpcc 4k cage is specifically designed for blackmagic Design Pocket Cinema Camera 4K, it would not block any buttons on the camera and you are able to access not only the battery but even the SD card slot.

Universal】shorter: arca-swiss standard screw-knob quick release plate + longer: l-shaped quick release plate compatible with most of dslr cameras with arca-swiss standard, suck like canon eos 80d t6 5d mark ii 6D 60D 7D 70D 77D D800 T6i 1300D Sony a7riii a7rii A7S a6000 a6300 a6500 Nikon D750 D850 D3400 D3300 D5600 D5300 D7200 D7500 Z6 PANASONIC GH5 GH4 GH3 and more DSLR camera of small size.

Elevated compatibility: drastically increases runtime of your Sony cameras, including NX5 / TRV1 / TRV3 and TRV9E /46E / 49E series see the description for the full compatibility list. Secure construction, reliable charging: Features overcharge, short circuit, and overheating protections, over voltage, over discharge, as well as a fire-resistant build.

NP-F550 RAVPower Battery Charger for Sony NP F970, F750, F770, F960, F550, F530, F330, F570, CCD-SC55, TR516, TR716, TR818, TR910, TR917 and more 2-Pack Replacement Battery Kit, Dual Slot Charger - Easy link Connection for Adding Accessories. Compatibility sony cd-rv100/rv200/sc series/sc5/sc5/sc5/e/sc55/sc55e/sc6/sc65/sc7/sc7/e/sc8/e/sc9/tr series/tr1/tr11/tr1100e/tr12/tr18/tr18e/tr1e/tr2/tr200/tr205/tr215/tr2200e/tr2300/tr2300e/tr280pk/tr290pk/tr3/tr3/tr300/tr3000/tr3000e/tr3100e/tr311e/tr315/tr315e/tr317/tr3200e/tr3300/tr3300e/tr411e/tr412e/tr413/tr414/tr415e/tr416/tr417/tr417e/tr425e/tr427/tr427e/tr500/tr511e/tr512e/tr515e/tr516/tr516e/tr517/tr555/tr57/tr610/tr617/tr617e/tr618/tr618e/tr640e/tr67/tr710/tr713e/tr716/tr717e/tr718/tr718e/tr728/tr728e/tr730e/tr76/tr760e/tr810e/tr818/tr840e/tr845e/tr87/tr910/tr913e/tr917/tr918e/tr930/tr940 secure Construction, Reliable Charging RAVPower provides efficient, reliable charging solutions.

Solid and fast set up with the new Quick Power Lock System. Easy installation】the shorter plate is installed on the bottom and with the standard slot of Swiss-Arca 38-39mm.

More information about RAVPower CA-RP-BC006-023


Similar products: