Zhiyun WEEBILL S Gimbal Stabilizer Standard Package, Zhiyun-Weebill-s-DSLR-Gimbal

#ad
zhi yun Weebill S Standard #ad - A4 paper size & underslung mode】the versatile structure providing an effortless all day holding experience 14-hour runtime and the latch-lock design allows balance and lock Axis by Axis, which saves 50% of time. Greater compatibility auto payload tune】with 300% improvement in motor torque and 50% increase in responsiveness, Combos like Sony A7Ⅲ+FE 24-70mm F2.

8 and canon 5d4+ef 24-70mm F2. 8 can be perfectly balanced and stabilized on WEEBILL-S, which can auto tune its motor power grade to best adapt to your camera setup. Big promotion by adding both to cart. Whatever camera & lens combo you're using, you can always pull focus or zoom precisely via the included cable and a servo focus controllernot included.

Zhiyun WEEBILL S Gimbal Stabilizer Standard Package, Zhiyun-Weebill-s-DSLR-Gimbal #ad - Updated viatouch 2. 0】while coupled with transmount Image Transmission Modulesold separately, weebill s gimbal will realize wireless image transmission, real-time phone control Viatouch 2. 0 on gimbal/camera, and sync motion. Instant gimbal settings】the all-inclusive intuitive oleD display can show various adjustable parameters like motor strength, key customization and etc, follow speed, smoothness, deadband, all of which can be directly controlled via the handle without having to enter the App.

Both make it possible to "Easy Go and Shot". Always on focus】weebill-s supports both electronic focus control and mechanical focus/zoom control through a handy control wheel on its body.

More information about zhi yun Weebill S Standard #ad

SMALLRIG Adjustable Camera Monitor Mount for DJI Ronin-S/Ronin-SC/Zhiyun Crane 3/Weebill Lab - BSE2386

#ad
SMALLRIG #ad - Features holes on Each Thumbscrews for Hex Spanner 6. Mounting points】there are three 1/4-20 accessory holes and a cold shoe mount for microphone or light. Adjustable degree】the monitor support allows 360-degree adjustment for better shooting. Supports Monitor up to 1kg 3. Adjustable degree of tightness note1: Maximum payload: 1kg Note2: Please do use the hex spanner to re-tighten the thumbscrew to ensure safe.

Tilt 180° with free-Stop at Any Position 4. Besides, the mount features a rubber pad to protect your monitor from scratching. Gimbals compatibility: dji ronin-s dji ronin-sc zhiyun crane 3 lab zhiyun weebill lab monitor compatibility: any 5"monitor kit weights less than 1kg smallHD Focus Series SmallHD Focus OLED Series SmallHD UltraBright Series SmallHD 500 Series Atomos Ninja Series Blackmagic Video Assist 5" SmallHD 700 Series Package Includes: 1 x Monitor Mount Product Dimensions: 128 x 80 x 31.

SMALLRIG Adjustable Camera Monitor Mount for DJI Ronin-S/Ronin-SC/Zhiyun Crane 3/Weebill Lab - BSE2386 #ad - 5mm package dimensions: 155 x 80 x 40mm net weight: 125g package weight: 157g materials: Aluminum Alloy High customization】smallrig monitor mount 2386 can hold your monitor onto your dji ronin-s/ ronin-SC, Zhiyun CRANE 3, or Weebill Lab handheld gimbal. Designed for dji ronin-s/ronin-SC/Zhiyun Crane 3/ Weebill Lab 2.

1/4"-20 & cold shoe Accessory Mount 5. Please note that it can only support monitor up to 1kg, especially designed for 5" monitors. Easy adjustment】the monitor bracket features 180° tilt and it can stop at any position without limitation. Smallrig adjustable monitor mount for dji ronin-s/Ronin-SC/Zhiyun Crane 3/ Weebill Lab BSE2386 Key Features: 1.

More information about SMALLRIG #ad


Similar products:


Zhiyun 2pcs TransMount Quick Setup Kit 1/4" Thread Mount Compatible + 1pcs Transmount Phone Holder for Zhiyun Weebill lab

#ad
Zhiyun #ad - Adjustable degree】the monitor support allows 360-degree adjustment for better shooting. Compatible with Zhiyun WEEBILL LAB. Transmount phone holder the transmount Phone Holder with Crown Gear clamp turns your smartphone into a real-time monitor, framing and parameter control over your camera. Please note that it can only support monitor up to 1kg, especially designed for 5" monitors.

Easy adjustment】the monitor bracket features 180° tilt and it can stop at any position without limitation. 2 pack transmount quick setup kit: quick release and Setup Design Quick setup kit originally created by ZHIYUN allows you to release and set up the tripod/monopod on the stabilizer quickly instead of screwing.

Zhiyun 2pcs TransMount Quick Setup Kit 1/4" Thread Mount Compatible + 1pcs Transmount Phone Holder for Zhiyun Weebill lab #ad - The transmount quick setup kit has a 1/4" screw and a 3/8" hole. Without transmount quick Setup Kit: Screwing the tripod/monopod onto the stabilizer will take several minutes. Besides, the mount features a rubber pad to protect your monitor from scratching. The kit allows you to switch between upright mode and underslung mode in a few seconds.

Firm locking】smallrig bse2386 is with a built-in thumbscrew, which features holes for hex spanner to ensure your monitor safe. Also enables you to take a selfie. With transmount quick setup Kit: Only a few seconds, you can change your holding gesture.

More information about Zhiyun #ad


Similar products:


Zhiyun Quick Setup kit to Attach and Detach Tripod, handgrip Quickly for Weebill LAB/Weebill S Zhiyun Crane V2/Plus/2 Smooth 4 Feiyu a2000 AK2000/AK4000 Moza Aircross 2 with EACHSHOT Cleaning Cloth

#ad
Zhiyun SG_B07L8BKSLV_US #ad - Not for zhiyun Crane 3 LAB. Adjustable degree】the monitor support allows 360-degree adjustment for better shooting. The transmount quick setup kit has a 1/4" screw and a 3/8" hole. Compatible with Zhiyun WEEBILL LAB. Compatible with Zhiyun WEEBILL LAB. Please note that it can only support monitor up to 1kg, especially designed for 5" monitors.

Easy adjustment】the monitor bracket features 180° tilt and it can stop at any position without limitation. Mounting points】there are three 1/4-20 accessory holes and a cold shoe mount for microphone or light. The transmount quick setup kit has Universal 1/4" Thread Mount. Another section needs to be installed on the  mini tripod featuring a 1/4"-20 threaded screw and threaded hole design applies to connect stabilizers/ Cameras /other types of equipment has  1/4'' thread to Tripod/ Monopod, with facilitates quick set up and removeMore Feature: Made of aluminum, it provides a reliable holdSpecification: Mount Types: 1/4"-20 Threaded Screw on Top and 1/4"-20 Hole on the Bottom Material: Aluminum & Silicone Dimensions: 40

Zhiyun Quick Setup kit to Attach and Detach Tripod, handgrip Quickly for Weebill LAB/Weebill S Zhiyun Crane V2/Plus/2 Smooth 4 Feiyu a2000 AK2000/AK4000 Moza Aircross 2 with EACHSHOT Cleaning Cloth #ad - 5 x 26. 5 x 405 mm weight: 56gsuggestion: if you would need it for zhiyun weebill, it will better to get two adapterspackage Including: 1 x Zhiyun Quick Setup 1x  EACHSHOT Cleaning Cloth High customization】smallrig monitor mount 2386 can hold your monitor onto your dji ronin-s/ ronin-SC, Zhiyun CRANE 3, or Weebill Lab handheld gimbal.

Reliable Quality. Instead of having to screw and unscrew the mini tripod each time, just pull back on the collar of these adapters and instantly secure or remove the tripod, so you can switch WEEBILL LAB  from the standard position to handy underslung position in few second.

More information about Zhiyun SG_B07L8BKSLV_US #ad


Similar products:


Compact Wireless Microphone System, Transmitter and Receiver - Rode Wireless Go

#ad
Rode Microphones WIGO #ad - Advanced: the transmitter and receiver pair in just 3 seconds / 3-stage output pad: 0, -6dB and -12dB / Use up to 8 systems in one location. Clip-on mic or beltpack transmitter for lavalier/headset micbuilt-in omnidirectional condenser mic for broadcast-level sounddelivers crystal clear audio under any conditionsUp to 70m range, Zhiyun CRANE 3, including a battery saver modeSuper-lightweight and ultra-compactThe transmitter and receiver pair in just 3 seconds3-stage output pad: 0, -6dB and -12dBUse up to 8 systems in one location High customization】smallrig monitor mount 2386 can hold your monitor onto your dji ronin-s/ ronin-SC, but optimized for shorter-range operationTX and RX have built-in USB-C rechargeable batteriesUp to 7 hours on a full charge, or Weebill Lab handheld gimbal.

Compatible with Zhiyun WEEBILL LAB. Audio: delivers crystal clear audio under any conditions / Up to 70m range, but optimized for shorter-range operation. The transmount quick setup kit has a 1/4" screw and a 3/8" hole. Adjustable degree】the monitor support allows 360-degree adjustment for better shooting.

Compact Wireless Microphone System, Transmitter and Receiver - Rode Wireless Go #ad - Power: tx and rx have built-in usb-c rechargeable batteries / Up to 7 hours on a full charge, including a battery saver mode. It consists of two pieces, one piece with 1/4 screw thread and the other with 1/4 hole. Portable: Super-lightweight and ultra-compact. Besides, the mount features a rubber pad to protect your monitor from scratching.

More information about Rode Microphones WIGO #ad


Similar products:


EACHSHOT WB-Grip Handheld Grip for Zhiyun Weebill Lab Not for Weebill S

#ad
EACHSHOT na #ad - Features: designed for zhiyun weebill lab Has Ten 1/4 Inch Screw Holes Enables you to mount more accessory on gimbal such as monitor, microphone etc. It consists of two pieces, one piece with 1/4 screw thread and the other with 1/4 hole. Besides, the mount features a rubber pad to protect your monitor from scratching.

Combo: clip-on microphone or beltpack transmitter for lavalier/headset mic / Built-in omnidirectional condenser mic for broadcast-quality sound. Adjustable degree】the monitor support allows 360-degree adjustment for better shooting. Audio: delivers crystal clear audio under any conditions / Up to 70m range, but optimized for shorter-range operation.

The transmount quick setup kit has Universal 1/4" Thread Mount. Use the handgrip to enter a handy underslung position to make shooting effortlessPackage Including: 1 x EACHSHOT WB-Grip High customization】smallrig monitor mount 2386 can hold your monitor onto your dji ronin-s/ ronin-SC, Zhiyun CRANE 3, or Weebill Lab handheld gimbal.

EACHSHOT WB-Grip Handheld Grip for Zhiyun Weebill Lab Not for Weebill S #ad - Power: tx and rx have built-in usb-c rechargeable batteries / Up to 7 hours on a full charge, including a battery saver mode. Reliable Quality. Designed for Zhiyun Weebill Lab. The transmount quick setup kit has a 1/4" screw and a 3/8" hole. Firm locking】smallrig bse2386 is with a built-in thumbscrew, which features holes for hex spanner to ensure your monitor safe.

More information about EACHSHOT na #ad


Similar products:


Zhiyun TransMount Servo Zoom/Focus Controller Max for WEEBILL LAB and Crane 3 LAB.

#ad
zhi yun #ad - The transmount quick setup kit has Universal 1/4" Thread Mount. Compatible with Zhiyun WEEBILL LAB. High-powered motor. Dual control from both phone & gimbal Focus or zoom control via buttons on gimbal handwheel or smartphone app, fully release the potential of users. Real-time Focus Following. Audio: delivers crystal clear audio under any conditions / Up to 70m range, but optimized for shorter-range operation.

The transmount quick setup kit has a 1/4" screw and a 3/8" hole. Please note that it can only support monitor up to 1kg, especially designed for 5" monitors. Easy adjustment】the monitor bracket features 180° tilt and it can stop at any position without limitation. Users can mount, dismount and balance camera and Max setup in one step.

Zhiyun TransMount Servo Zoom/Focus Controller Max for WEEBILL LAB and Crane 3 LAB. #ad - Type-C Port. Quick setup featuring brand-new zhiyun quick setup system, max can be directlyinstalled on quick release plate with tool free design;Featuring brand-new ZHIYUN quick setup system, Max can be directly installed onquick release plate without the need for tools. Designed for Zhiyun Weebill Lab.

It consists of two pieces, one piece with 1/4 screw thread and the other with 1/4 hole. Compatible with Zhiyun WEEBILL LAB. Advanced: the transmitter and receiver pair in just 3 seconds / 3-stage output pad: 0, -6dB and -12dB / Use up to 8 systems in one location.

More information about zhi yun #ad


Similar products:


2213 - SMALLRIG Folding Tool Set with Screwdrivers and Hex Key Wrenches, Tool Set with Seven Functional Tools Included

#ad
SMALLRIG AAK2213-SR #ad - Dual-purpose System for Zoom or Focus. Model: cmF-04. The transmount quick setup kit has Universal 1/4" Thread Mount. Key features: 1. Additional threaded holes M3, M5, M4, 3/8 on the side for spare screws. Advanced: the transmitter and receiver pair in just 3 seconds / 3-stage output pad: 0, -6dB and -12dB / Use up to 8 systems in one location.

Type-C Port. The transmount quick setup kit has a 1/4" screw and a 3/8" hole. Power: tx and rx have built-in usb-c rechargeable batteries / Up to 7 hours on a full charge, including a battery saver mode. Besides, the mount features a rubber pad to protect your monitor from scratching. Combo: clip-on microphone or beltpack transmitter for lavalier/headset mic / Built-in omnidirectional condenser mic for broadcast-quality sound.

2213 - SMALLRIG Folding Tool Set with Screwdrivers and Hex Key Wrenches, Tool Set with Seven Functional Tools Included #ad - It consists of two pieces, one piece with 1/4 screw thread and the other with 1/4 hole. Real-time Focus Following. Portable: Super-lightweight and ultra-compact. Reliable Quality. All tools folded in one pocket-sized compact set; 3. Please note that it can only support monitor up to 1kg, especially designed for 5" monitors.

More information about SMALLRIG AAK2213-SR #ad


Similar products:


SMALLRIG Cold Shoe Adapter Relocation Plate for Sony A6100/A6300/A6400/A6500 - BUC2334

#ad
SMALLRIG #ad - Besides, the mount features a rubber pad to protect your monitor from scratching. Foe sony a6100/a6300/a6400/a6500】the relocation plate is exclusively designed to provide external cold shoe mounts for Sony A6300/A6400/A6500 High customization】with no obstruct the original hot shoe mount and the tilt screen on the camera, SmallRig BUC2334 fits the camera perfectly so that you can put it on the camera all the time.

Power: tx and rx have built-in usb-c rechargeable batteries / Up to 7 hours on a full charge, including a battery saver mode. 7 in 1 multi-function kit】4 pieces allen wrenches: 2. 5, 4, 3, 3/16; 1 slotted screwdriver; 1 Phillips screwdriver; 1 Torx T25 driver. Portable folding tool set】a pocket-sized folding tool set with a compact design for video photographers, also convenient to carry and store.

SMALLRIG Cold Shoe Adapter Relocation Plate for Sony A6100/A6300/A6400/A6500 - BUC2334 #ad - High-powered motor. Compatible with Zhiyun WEEBILL LAB. Audio: delivers crystal clear audio under any conditions / Up to 70m range, but optimized for shorter-range operation. Not for zhiyun Crane 3 LAB. Adjustable degree】the monitor support allows 360-degree adjustment for better shooting. Firm locking】smallrig bse2386 is with a built-in thumbscrew, which features holes for hex spanner to ensure your monitor safe.

Type-C Port.

More information about SMALLRIG #ad


Similar products:


Blackmagic Design Pocket Cinema Camera 6K with EF Lens Mount

#ad
Black Magic CINECAMPOCHDEF6K #ad - Not for zhiyun Crane 3 LAB. Model: cmF-04. The transmount quick setup kit has Universal 1/4" Thread Mount. Anti-twisting】the relocation plate secures firmly on the camera strap holes on each side via an m2. 5 screw to prevent twisting. Compatible with Zhiyun WEEBILL LAB. Advanced: the transmitter and receiver pair in just 3 seconds / 3-stage output pad: 0, -6dB and -12dB / Use up to 8 systems in one location.

Please note that it can only support monitor up to 1kg, especially designed for 5" monitors. Easy adjustment】the monitor bracket features 180° tilt and it can stop at any position without limitation. Effective sensor size: 23. 10 x 12. 99 millimeter Super 35. Designed for Zhiyun Weebill Lab. Type-C Port. Shooting resolutions: 6144 x 3456 6k up to 50 fps / 6144 x 2560 6k 2.

Blackmagic Design Pocket Cinema Camera 6K with EF Lens Mount #ad - 4:1 up to 60 fps / 3840 x 2160 ultra hd up to 60 fps / 5744 x 3024 5. 7k 17:9 up to 60 fps / 3728 x 3104 3. 7k 6:5 anamorphic up to 60 fps / 4096 x 2160 4k dci up to 60 fps / 2868 x 1512 2. 8k 17:9 up to 120 fps / 1920 x 1080 HD up to 120 fps.

More information about Black Magic CINECAMPOCHDEF6K #ad


Similar products:


Replaces 3299-Black - Manfrotto 323 RC2 Rapid Connect Adapter with 200PL-14 Quick Release Plate

#ad
Manfrotto 323 #ad - Effective sensor size: 23. 10 x 12. 99 millimeter Super 35. High-powered motor. 7 in 1 multi-function kit】4 pieces allen wrenches: 2. 5, 3, 4, 3/16; 1 slotted screwdriver; 1 Phillips screwdriver; 1 Torx T25 driver. Portable folding tool set】a pocket-sized folding tool set with a compact design for video photographers, also convenient to carry and store.

Additional thread holes】the multi-tool set comes with additional m2. 5, m3, m5, m4, 1/4 threaded holes on the side for keeping screws in reserve in case missing the original screws. All-meatal constrution】the whole key set is made of aluminum alloy and stainless steel, sturdy and durable. Audio: delivers crystal clear audio under any conditions / Up to 70m range, but optimized for shorter-range operation.

Replaces 3299-Black - Manfrotto 323 RC2 Rapid Connect Adapter with 200PL-14 Quick Release Plate #ad - Designed for Zhiyun Weebill Lab. Adjustable degree】the monitor support allows 360-degree adjustment for better shooting. It is convenient for you to relocate the original hot shoe to each side for microphone, light or other accessories. Project frame rates of 23. 98, 29. 97, 59. 94 and 60 fps supported; off-speed frame rates up to 60 fps in 6K 2.

More information about Manfrotto 323 #ad


Similar products: